122: Computing Voltage Drop Using HIFREQ
Asistencia técnica Base de conocimiento y preguntas frecuentes Question 122
Asistencia técnica Base de conocimiento y preguntas frecuentes Question 122
Question
How can HIFREQ be used to compute the Voltage Drop along a conductor?
Answer
The GPR difference between the mid-points of the two conductor
segments on either side of an impedance gives only the scalar
potential difference between those two potentials. The full voltage
difference that you have to use to verify the V = Z I formula is
obtained by integration of the electric field between those two points
(along a path following the conductors) and includes a vector
potential term in addition to the scalar potential difference.
One way to account for the vector potential term is to put a computation
profile with a few points (maybe 10) stretched between those two points,
then request the computation of the vector potential. Right after the table
listing the vector potential values in the F09 file, there should be a table
listing the voltage difference between all points on the profile and the
origin of the profile. Unfortunately, it was realized recently that this
quantity is computed to insufficient accuracy for many applications.
However, the so-called "Induced" voltage in the table corresponds
to the vector potential term and appears to be unaffected by this
accuracy problem. You can therefore use it safely. It should be added
to the GPR difference between the mid-point of the segment lying
towards the end of the original conductor (P2) and the mid-point of the
segment lying towards the origin of the original conductor (P1). The
profile should be oriented from P1 to P2.
No Related Articles Available.
No Attachments Available.
No Related Links Available.
No user comments available for this article.